Characteristics:
Portable hot and cold hammer for facials. One end of the hammer provides heat, which acts on the skin, relaxing the muscles and opening the pores.
The opposite end is used to apply cold to the skin, reducing wrinkles and smoothing the skin.
Technical characteristics:
- Input voltage: 220 ~ 240V
- Working temperature: 5 - 40ºC.
Indications:
- During the first use, the hot and cold hammer will start working after 5 minutes once all the adjustments have been made.
- After the first treatment, a 3 minute break is needed before the next treatment.
- The best working environment temperature is 25 degrees.
- Do not obstruct the ventilation slots in the hammer as it may cause overheating and consequently a short circuit in the electrical system.
Contraindications:
- The two faces of the hot and cold hammer are made of aluminum alloy, avoid hitting these parts.
- If the metal parts of the hammer are damaged, replace them with new ones.
Declaration of conformity:
- The measures of the Low Voltage Directive: 2014/35 / EC
- The measures of the Electromagnetic Compatibility Directive: 2014/30 / EC
Warranty: