EPTE® System + Training + Needle Kit + Chlorhexidine

EPTE® System + Training + Needle Kit + Chlorhexidine

By acquiring the EPTE® System + Hands-free pedal + Training Pack, you will be able to have:

• EPTE® Case: EPTE® System + 1 Needle Holder + 1 Connection Cable + 4 Contact Electrodes + 3 AA 1.5V batteries + 1 EPTE® 0.30x20 Needle Box + 1 EPTE® 0.30x30 Needle Box + 1 Box of EPTE® Needles 0.30x40 + Chlorhexidine
• EPTE® training included.

The EPTE® case includes:

• EPTE® equipment.
• 1 Needle holder.
• 1 connecting cable
• 4 Contact electrodes
• 3 AA 1.5V batteries
• 1 Box of EPTE® Needles 0.30x30
• 1 Box of EPTE® Needles 0.30x30
• 1 Box of EPTE® Needles 0.30x40
• Chlorhexidine

EPTE® System, percutaneous electrolysis device with CE sanitary certificate. Equipment designed specifically for the application of percutaneous electrolysis safely towards the patient as well as guarantees and tranquility for the professional.

It allows the application of an invasive physiotherapy technique for the treatment of tendinosis and fibrillar ruptures, through the application of microcurrents through an acupuncture needle to access the damaged soft tissue and induce self-recovery.

With the application of EPTE® and, thanks to its intensity modulator (µA / m2), we produce an electrical stimulus that causes the decomposition of the degenerated soft tissue and causes an inflammatory response, necessary for any repair, without the healthy tissue becoming look affected. Thanks to EPTE, we can treat soft tissues and achieve excellent results. It is a pioneering technique, with painless currents and rapid recovery

Technical specifications:

General

• Dimensions: 220x140x46mm.
• Container: High impact resistant ABS box.
• Weight: 350g (without batteries)
• Power supply: 3 non-rechargeable AA 1.5V alkaline batteries.
• Consumption: 35mA.
• Autonomy: 3100 treatments (500μA / 10KΩ for 80Sg)
• Equipment classification: Class IIa according to rule 9 of directive 93/42 / CEE on medical devices.
• Percutaneous Electrolysis Therapy
• Current waveform: Continuous [1].
• Maximum output voltage: 48V.
• Minimum output current: 50μA.
• Maximum output current: 2500μA.
• Minimum current resolution: 10μA.
• Minimum time resolution: 5μSg.
• Maximum treatment time: Unlimited.

[1] The treatment is composed of two current modes, initially the current rises until reaching the nominal value of the treatment, where the stationary or continuous mode begins.

Screen

• Dimensions: 80x36 mm.
• Type: Reflective alphanumeric LCD display.
• Resolution: 16 characters x 2 lines.
• Maximum vertical angle of view: 40º
• Maximum horizontal angle of view: 30º

Environmental specifications

• Operating temperature: 0 ° C to 40 ° C
• Storage and transport temperature: -20ºC to 60 ºC
• Humidity: 5% to 95% relative humidity, non-condensing.
• Electromagnetic compatibility test standards: EN 60601-1-2 (2007). Corrigendum 2010.
• Electrical safety test standards: EN 60601-1: 2006. Corrigendum 2010 IEC 60601-2-10: 2012.