APS dry puncture needle 0.25x25mm (100)
Brand: AguPunt
Reference: A1038P
Description
These new APS® needles have been specially created and designed for DRY NEEDLE in collaboration with Professor Orlando Mayoral. With their advice they have created a range of needles that will meet your needs as professionals.
Details
Product characteristics:
- Headless needle
- With guide
- Stiffer handle for better handling
- Special sharpening for dry needling, in conical shape, improves needle penetration and handling (the thickness of the steel wire of the handle is 0.08 mm higher than that of the acupuncture needle, this allows us a higher resistance).
- Triple layer of oil (painless needle)
- Hardened surgical steel, greater hardness and high resistance. Get a longer duration of sharpening, for multiple insertions.
- Presentation: Box of 100 units
- Dry Puncture Needle 0.30 x 75 mm with Guide (100)
- Uses a Class I, Type II Steel *
* Note: The measurements of the needles are expressed in millimeters. The first digit indicates the thickness and the second the length.
Differences with traditional needles
* Steel class I, type II
Surgical Steel is a variation of steel that is commonly made up of an alloy of chromium (12–20%), molybdenum (0.2–3%), and sometimes nickel (8–12%).
- Chromium gives this metal its resistance to wear and corrosion.
- Nickel gives a smooth, polished finish.
- Molybdenum makes it harder and helps keep the edge sharp.
High Strength Surgical Stainless Steel 17-4 tends to have a moly composition of 2% instead of the 0.8% found in classic acupuncture needles. Due to the high cost of this material, it is normally used in low proportions so as not to make the products more expensive, in our case the concentration is highly increased to achieve the desired effects. (Improves the duration of sharpening, sharpening more precision)
